Resol DeltaSol E Manual

2.3 Menu structure
main menu
1. meas. values
2. reports
3. Solar
4. Arrangement
5. WMZ
6. manual operation
7. user code
8. Expert
The clear-text display shows a 4-line part of the selected
menu.
2.4 User codes
Adjustment and control of the controller are carried out via
the menu.When the controller is commissioned, the display
level is in the main menu. In the first line of each submenu
you will find the option “back”, by means of which it is
possible to get to the former menu level. In the following
diagrams you will find the complete menu contents; since
some of the menu points depend on the system, option or
message, in some cases not all of the shown text lines are
indicated.
Main menu is shown on the display in the initial state. A
selection can be made between 8 sub-menus.
1. Expert Code 0262 (factory setting)
All menus and adjustment values are shown
and all adjustments can be altered.
2. User Code 0077
The expert level is shown, parameter access
is restricted.
3. Customer Code 0000
The expert level is not shown, adjustment
values (solar) can be changed partly; modi-
fication of options, parameter and balance
values is not possible.
For safety reasons, the user code should ge-
nerally be set to “0000” before the control-
ler is given to the customer!
Note:
After the menu point “user code” has been
choosen, enter the user code!
Note:
The choice of adjustment values and options
depends on different functions and the user
code. Some only appear in the display if they are
available for the adjusted system parameters.
D e lt a S o l
®
E
© RESOL 10306_DeltaSol_E.monus.indd
| 8

Resol DeltaSol E Specifications

General

Brand	Resol
Model	DeltaSol E
Category	Controller
Language	English