Using your hearing aids
Turning your hearing aids on and off
Automatic mute function while charging
When you take off your hearing aids, place them in the charger to charge. Ensure that the charger is plugged in
(LED on back will light up).
When you close the lid, the hearing aids will be muted (so as not to whistle) and charging will begin. You can see
the charging status on the front LEDs.
When you remove the hearing aids from the powered on charger, they will beep. This indicates that the hearing
aids are turning on, but still muted for a short while, so they don’t whistle while you put them in your ears. If
requested, your hearing care professional can remove this function.
Your hearing aids always start in program1 at the pre-set volume.
NOTE: If the charger is disconnected during use, the hearing aids in the charger will turn off.
14 Using your hearing aids
To Next Page
Loading...
