3
Smart Launcher
Both ReSound Aventa 3.16 and ReSound Smart Fit 1.8 are contained within one software
installation. The Smart Launcher will detect both ReSound ONE and any ReSound Smart
Fit hearing aids as well as ReSound Aventa legacy hearing aids, and then retrieve the
software appropriate for the connected device.
1. Reboot the rechargeable hearing aid by pressing and holding the push button for 5
seconds until the LED light flashes. This means the hearing aid is “o”. Press and hold
again until the light shows solid, meaning that it is “on” again. The devices can also be
rebooted by placing them in the charger and removing them.
2. Click ‘Connect’ in the upper right of the Launcher screen.
2
To Next Page
Loading...
