5
Connection flow
Once the hearing aids have been selected the connection process will begin.
2. Calibrate hearing aids to activate DFS Ultra III. If using M&RIE (MM) receivers,
calibration is required in order to save the fitting.
3. If the fitting software indicates that dynamic feedback is at risk for each
ear, a more occluding dome or a custom earmold should be used. Change as
recommended and recalibrate.
1. Select physical properties of the hearing aid.
RT961-DRWC M&RIE 1 MM Receiver RT961-DRWC M&RIE 1 MM Receiver
To Next Page
Loading...
