RESQTEC Q1 - Disconnecting the Resqtec NEO1 Coupler

USER MANUAL CUTTER Q1
12
RESQTEC Manual Q1 CUTTER (DM068K06)
4.7. DISCONNECTING THE RESQTEC NEO1 COUPLER
1
2
3
Rotate the NEO1 female coupler unlock ring in the direction of the arrow and pull backwards.
Make sure the control handle of the product is not engaged when
disconnecting (neutral position).
The NEO1 female coupler on the hose ejects automatically.
Afewdropsofuiddischargeisnormal.
Make sure the dust caps are placed back on both couplers (male & female).