USER MANUAL CUTTER Q1
26
RESQTEC Manual Q1 CUTTER (DM068K06)
S8. TROUBLESHOOTING
If you encounter any problems whilst using the Q1, please advise the following table:
IF YOU CANNOT FIND THE PROBLEM THAT OCCURRED, OR IF THE PROVIDED SOLUTION DID NOT RESOLVE THE
PROBLEM, STOP USING THE PRODUCT IMMEDIATELY AND CONTACT A CERTIFIED DISTRIBUTOR/SUPPLIER OR ONE OF
THE RESQTEC OFFICES.
Symptom Solution
Couplers cannot be connected to the product.
- Use the pressure release button. See chapter 4.10 for detailed
information.
The product is connected to a power unit, but the blades will not open
or close.
- Make sure the product is properly connected to the power unit.
- Make sure the right valves on the power unit are opened.
- Make sure there is enough hydraulic oil and gasoline in the power
unit.
To Next Page
Loading...