USER MANUAL CUTTER Q1
20
RESQTEC Manual Q1 CUTTER (DM068K06)
6. MAINTENANCE & STORAGE
Generally speaking it is most important is to keep your equipment clean. Clean equipment will not wear down as fast;
hence a longer service life can be achieved.
WEAR PERSONAL PROTECTION EQUIPMENT DURING MAINTENANCE. ENSURE THAT THE USED HYDRAULIC OIL IS
COLLECTED AND DISPOSED OF IN A RESPONSIBLE MANNER.
6.1. MAINTENANCE AFTER USE
ACTIE TOELICHTING EXTRA INFORMATIE
1.
Check the product and hoses for any
damage.
• Visually check for damage.
• Check the unit for excessive oil leakage.
• Check the blades for excessive wear.
If structural damage to the product
is discovered, contact your Resqtec
distributor/supplier.
2. Check dead-man’s handle.
• Check whether it automatically returns
to its neutral position after the handle is
turned and released.
If the dead-man’s handle is not
functioning properly, contact your
Resqtec distributor/supplier.
3. Clean and dry the product before storage.
• Preferably use dry, clean paper cloth.
• Mild soapy water can be used if
necessary.
Do NOT use any oil.
Dry thoroughly after using water.
4. Clean and dry hoses used before storage.
• Preferably use dry, clean paper cloth.
• Mild soapy water can be used if
necessary.
Do NOT use any oil.
Dry thoroughly after using water.
5.
Check the couplers and dust caps for dirt.
Clean if necessary.
• Use dry, paper cloth. Do NOT use any oil.
To Next Page
Loading...