USER MANUAL CUTTER Q1
RESQTEC Manual Q1 CUTTER (DM068K06)
4.3. OPERATION
10
The product is operated by the dead-man’s control handle:
• Rotating the control handle leftwards will make the Q1’s blades open up.
• Rotating the control handle rightwards will make the Q1’s blades close.
To keep extending or retracting keep the control handle rotated. Adjust the speed by rotating more or less.
By releasing the control handle the dead-man’s control will make the control handle return to neutral position. The
pressure in the product will remain due to the DIN-valve. The Q1’s blades cannot be moved by external forces.
4.4. OPTIMIZED 350 BAR
Resqtec products operate at 350 bar/5,075 PSI allowable pressure (Optimized 350 bar), which allows a smooth and more controlled product
operation. To support interoperability, Resqtec can also provide means to connect the products to other brands’ system components. Contact your
distributor/supplier for information about parts (couplers e.g.) to make your equipment ready for interoperability.
ALWAYS BE AWARE THAT TO CONNECT A RESQTEC PRODUCT TO ANY PUMP, THE SAME HYDRAULIC FLUID AND
COUPLERS NEED TO BE USED.
Your product can be supplied with the requested coupler(s) or can be changed in a later stadium by your
distributor/supplier. It is also possible to purchase an adaptor kit between different connectors. Contact your
distributor/supplier
if
you
want
to
connect
to
another
pump
and
change
the
uid
and/or
coupler
if
necessary.
In this manual the Resqtec NEO1 couplers and the Resqtec STD couplers are described; follow the instructions of your current couplers only
.
NEUTRAL
RIGHTLEFT
To Next Page
Loading...