23
USER MANUAL CUTTER Q1
RESQTEC Manual Q1 CUTTER (DM068K06)
INSPECTION ON HOSE ASSEMBLIES
DO NOT TAKE UNNECESSARY RISK BY UTILIZING FAULTY HOSES. WORN OR DAMAGED HOSES CAN CAUSE SERIOUS
INJURY AND/OR DAMAGE TO THE RESQTEC SYSTEM AND OTHER PROPERTY.
1.
Thoroughly check the hoses for any wear,
cuts or bruises.
• Visually check for damage.
• Check the hose assemblies for oil
leakage.
All but the smallest anomalies should
be subjected to further inspection by
an authorized person. When in doubt
ALWAYS replace the hose.
2.
Connect all components and test all
functions.
• All products should make at least two
complete cycles.
To Next Page
Loading...