1. Ensure that your HD TV or monitor is switched OFF before you connect THEC64
2. Connect the HDMI cable to THEC64, and then connect the other end to your HD
TV or monitor
3. Connect THEC64 Joystick to a USB port on THEC64
4. Plug in the power supply to an appropriate power outlet, and then connect the
other end to THEC64
5. Switch ON your HD TV or monitor and choose the appropriate HDMI input
source
6. Press and release the POWER ON/OFF switch and the power LED glows red to
confirm THEC64 is now ON.
INITIAL SET UP
THEC64 asks questions about preferred settings. Using THEC64 Joystick, press
FIRE
to make selections and press
(or other joystick buttons as instructed) to advance.
See CHAPTER 3 for full details about setting up.
3
To Next Page
Loading...
