RESET COMPUTER
(only in Classic mode)
This resets the current computer model and returns it to BASIC without any programs
retained in memory.
The reset is instant.
Note that any inserted media (e.g. virtual disk, tape or cartridge) remains inserted
after a reset until you eject it or replace it with a different virtual media file of the
same type. This means the saved states for the last inserted media also remain
available via the MENU until the media is ejected or replaced.
For virtual cartridge files, eject them before selecting the reset computer option, else
the cartridge auto-boots after the reset. This does not apply for prg, p00 or t64 files
allocated to the cartridge slot by THEC64.
See CHAPTER 8 for further details on ejecting media.
SHUTDOWN
DEVICE>
This option shuts down
THEC64, which is the same
as pressing and holding
the POWER button for two
seconds.
CANCEL
This is highlighted by default.
SHUTDOWN
Highlight the option and press
FIRE
. THEC64 shows
‘Shutting down…’ before powering off.
46
To Next Page
Loading...
