If you press at any point, you leave Media access or the File Loader screen.
THEC64 will remember your current location on the USB stick, so when you next select
the Media access or File loader option, you return to the previously visited folder.
AUTO-LOADING FILES FROM USB USING
DEFAULT SETTINGS
Browse to and highlight a file, then press
FIRE
to confirm selection. In the File
loader, this auto-loads the selected file. In Media access, this inserts the file if it is
a virtual disk file (d64, g64, d81, d82), otherwise press
B
to auto-load the chosen
file. See
Inserting Virtual Disks on THEC64
later in this chapter for further details
about inserting.
Programs loaded from a USB stick will either work using the default settings, or they
will need to be customized using filename flags or CJM files, explained later.
55
To Next Page
Loading...
