Retro Games THEC64 - Page 73

Computer conguration
Type: X Possible values:
64
vic
pal
ntsc
driveicon
readonly
accuratedisk
fullheight
noaudioscale
bank0
bank1
bank2
bank3
bank5
3k
4k
8k
16k
24k
32k
35k
This sets the parameters needed to configure the computer before it loads and runs
the program.
The values are case sensitive and must be in lower case.
64 – Specifies a C64 computer model.
vic – Specifies a VIC 20 computer model.
pal – This makes the program behave as though running on a European (PAL)
computer. It doesn’t affect the HDMI output of THEC64.
ntsc – This makes the program behave as though running on a North American
(NTSC) computer. It doesn’t affect the HDMI output of THEC64.
driveicon – This activates the on-screen drive icon, to show when a disk is accessed.
readonly – This makes a disk read-only, meaning THEC64 cannot write back to the
virtual disk.
accuratedisk – This switches ON accurate (slower) disk drive functionality,
necessary for some programs to load correctly from a d64 or g64 file. This is off by
default.
63