RetroSound Model Two - Adjusting Sound Properties; Accessing Sound Properties

Model Two Owner’s Manual
Copyright 2014 © Retro Manufacturing, LLC Page 19
Funcon # Radio Mode USB Mode
System
Menu
8 Press and hold the right front knob for 3 seconds to access
the sub-menu system where you can adjust: Auto/Manual
tuning, RDS, Clock or Frequency Priority, Beep ON/OFF,
AREA USA/EU/Japan/AUS/RUS tuning, Stereo/Mono, Local/
DX (distant) tuning, Vol Adjust/Vol Last and volume default
level. Toggle the selecon by turning the right front knob
and pressing the right front knob to go to the next mode.
See “Sub-Menu System” on page 25 for detailed instrucons.
Press and release the right front knob to acvate the MUTE
funcon.
Preset 6
Recall/
Store
9 Turn the right rear knob
clockwise to select the #6
radio preset.
Turn and hold the right rear
knob clockwise to store
preset 6 into memory.
Turn and release the right
rear knob clockwise to repeat
the current track (RPT TRK)
or repeat all tracks (RPT ALL).
Turn and hold, then release
the right rear knob clockwise
to repeat the playback of
songs in that folder (RPT FLD).
Repeat
Play
Band 9 Turn the right rear knob
counter-clockwise to toggle
through 5 radio bands (2
AM and 3 FM). Note: When
tuning to a stereo FM sta-
on, a stereo indicator (two
ovals) will show in the upper
right side of the radio’s LCD
screen. If there is no stereo
icon seen, the staon is in
mono.
Turn the right rear knob
counter-clockwise once
to select “FOLDER” search
mode, turn the front right
knob clockwise or counter-
clockwise to select folders
(directories) on the usb drive.
Press and release the front
right knob to select the folder,
the rst song in that direc-
tory will be heard. Turning
the right rear knob counter-
clockwise twice will select the
“MUSIC” search mode. Turn
the front right knob clockwise
or counter-clockwise to select
songs within that selected
folder. Press and release the
front right knob to select the
desired song within the folder.
Track/
Directory
Search