RetroSound Model Two - Page 20

Model Two Owner’s Manual
Copyright 2014 © Retro Manufacturing, LLCPage 18
Funcon # Radio Mode USB Mode
Preset 2
Recall/
Store
4 Press to select the #2 radio
preset.
Press and hold to store
preset 2 into memory.
Press to play 10 seconds of
each track on the ash drive.
Press again to cancel the
preview scan funcon. The
song name appears as it plays.
INT ON appears on the screen
during intro scan mode.
Preview
Scan
Preset 3
Recall/
Store
5 Press to select the #3 radio
preset.
Press and hold to store
preset 3 into memory.
Press to randomly play all
digital tracks on your ash
drive, regardless of the folder
selected. RDM ON appears on
the screen during random
mode.
Random
Preset 4
Recall/
Store
6 Press to select the #4 radio
preset.
Press and hold to store
preset 4 into memory.
Press to move UP through
folders on your drive. The rst
le in the selected folder will
play. The screen will display
DIR 001, DIR 002, etc.
Select
Folder
Preset 5
Recall/
Store
7 Press to select the #5 radio
preset.
Press and hold to store
preset 5 into memory.
Press to move DOWN through
folders on your drive. The rst
le in the selected folder will
play. The screen will display
DIR 001, DIR 002, etc.
Select
Folder
Next/
Previous
8 Turn the right front knob to
tune to the next or previous
AM/FM frequency. Note:
When the radio is tuned
into a strong staon (in FM
only), the FM indicator will
show on the upper right
side of the LCD display (2
oval circles). This indica-
tor will only light up in FM
mode and ONLY when a
strong staon is selected.
Turn the right front knob to
change to the next/previous
track.
This funcon also applies to
Bluetooth audio mode.