RetroSound Model Two - Program Type and Area Settings

Model Two Owner’s Manual
Copyright 2014 © Retro Manufacturing, LLC Page 27
DIMMER
Use this menu opon to switch
the LCD brightness between high
(DIMMER HIGH) and low (DIMMER
LOW) Turn the right front knob clock-
wise or counter-clockwise to make
your selecon.
BT
Adjust this feature to turn the
Bluetooth funcon ON/OFF. Turn the
right front knob clockwise or counter-
clockwise to make your selecon.
BT DISCON/CONNEC
Turn the right front knob clockwise
to select “CONNEC” to enable the
Bluetooth funcon and search for
“RETROSOUND” in your phone’s
Bluetooth device list. Enter password
(0000) if prompted. Turn counter-
clockwise to select “DISCON” and
disconnect a Bluetooth device.
RDS ON/OFF
RDS stands for Radio Data System.
This funcon allows you to turn o
the RDS funcon if you do not want
to see the RDS informaon. The fac-
tory default seng is RDS ON.
RDS tuners can automacally tune in staons according to the style of music
(or talk) they broadcast. Some RDS tuners can even break in with trac alerts
or emergency broadcasts.
RDS enables your receiver to display text messages (usually call leers and
format info) that many FM staons include on a subcarrier signal within their
normal broadcast signal.
The RDS funcon is always acve, and if the FM staon you are listening to is
broadcasng RDS informaon, the radio staon call leers, song info, arst
info and other messages will appear. Please note that not all FM staons use
RDS nor will all RDS funcons work in the US.
RDS ON
DIMM HIGH
BT DISCON
BT ON