MINI 3D Scanner Quick Start Guide
COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED 14
File Naming Conventions
Save the 3D model as a .PLY file
NAME.ply (Point Cloud)
NAME_mesh.ply (Mesh no color)
NAME_mesh_tex.ply (Mesh with color)
NAME_mesh_tex.jpg (Texture color image)
Save the 3D model (no Color/Texture) as an .STL file:
NAME.ply (Point Cloud)
*
NAME_mesh.stl (Mesh no color)
**
*Point clouds are saved in the PLY file format, because STL does not support point clouds
**Color models are not saved in the STL file format
Save the 3D model (with Color/Texture) as an .STL file:
Revo Scan does not support color scans in the .STL file format, so they are saved as .PLY.
Save the 3D model as an .OBJ file:
NAME.obj (Point Cloud)
NAME_mesh.obj (Mesh no color)
NAME_mesh_tex.obj (Mesh with color)
NAME_mesh_tex.mtl
NAME_mesh_tex.jpg (Texture color image)
NOTE:
NAME_mesh_tex.obj, NAME_mesh_tex.mtl & NAME_mesh_tex.jpg are the three components of a color 3D model in the
OBJ file format.
To Next Page
Loading...
