Revopoint 3D Technologies MINI - Android USB Connection & Scan

MINI 3D Scanner Quick Start Guide
23 COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED
Android Smartphone Connects MINI Via USB Mode
Part List: MINI 3D Scanner, Power Bank, Phone Holder, 2-in-1 Mobile Cable and an
Android smartphone.
Hardware Connection
1）Screw the phone holder on the power bank;
2）Fix the MINI 3D Scanner on the phone holder;
3）Connect the 2-in-1mobile cable on the rear of the MINI 3D scanner, and tighten screws at both sides;