④ Please aim the scanner at the object to be scanned, hold it steady and move slowly during your
scan. The distance between the scanner and the object can be between 400 – 1300 mm. In the 3D
scanning interface in Revo Scan, refer to the distance indicator bar to ensure an excellent distance
between the scanner and the object.
Note: The scanning accuracy may be affected if the scanner is bashed by accident. In this case, please get in
touch with us to help you recalibrate the scanner with the Calibration Board. If the accuracy still cannot reach
the standard accuracy after recalibration, please return the scanner for repair.
To Next Page
Loading...
