④
You also must adjust the RGB Camera’s exposure when doing a color scan. Tap the button
for the exposure to be set automatically, or you can turn off the exposure and adjust the
exposure by dragging the slider until the object’s color in the RGB preview window is clear and
sharp.
⑤
Tap the button to start your scan. While scanning, hold the scanner steady and move slowly.
Try not to scan the same areas repeatedly.
⑥
Tap the button to finish the scan and enter the post-processing window when the scan is over.
⑦
Tap the icon to fill holes in the model (optional).
⑧
Tap the Post-processing button to automatically process the model. You can share the model to
Revo Scan on your PC for more editing options.
To Next Page
Loading...
