RANGE Quick Start Guide
©2023 REVOPOINT 3D ALL RIGHTS RESERVED 7
Step 3: Connect the Micro-B end of the USB cable to the back of your
RANGE.
Step 4: Plug the Type-A end into your computer.
Step 5: Open Revo Scan on your computer.
Note:
1) Connect the RANGE to a USB 3.0 port or above, as USB 2.0 will not
supply sufficient operating power. Ensure your USB 3.0 port is not
damaged or worn out.
2) If there is no Type-A port on your laptop, use the Type-A-to-C adapter.
To Next Page
Loading...
