Need help?Do you have a question about the Rexel LM45 and is the answer not in the manual?
General| Type | Pouch Laminator |
|---|---|
| Max Lamination Width | A4 (210 mm) |
| Warm-up Time | 5 minutes |
| Max Pouch Thickness | 125 microns |
| Speed | 300mm/min |
| Power Consumption | 350W |
Introduction to the manual's purpose and scope.
Illustrated list of moulding components with part numbers.
Illustrated list of head components with part numbers.
Illustrated list of electrical components with part numbers.
Step-by-step guide for replacing the machine's top cover.
Instructions for removing and replacing entry/exit mouldings.
Procedures for removing and replacing the main head unit.
Detailed steps for motor removal and replacement.
Guide for removing and replacing the machine's gears.
Instructions for replacing tension springs and lever arms.
Procedures for replacing rollers and their bearings.
Instructions for removing and replacing heater assemblies.
Steps for removing and replacing sideframes.
Guide for removing and replacing the front shelf moulding.
Procedures for removing and replacing the main lid.
Steps to remove and replace the paper support tray.
Specific instructions for replacing the keypad cover on LM45 models.
Procedure for replacing the keypad membrane.
To Next Page
