Getting Started
Quick Start
20
© 2019
REXING All Rights
Reserved.
Installation
Video guide: video.rexingusa.com
1. Attaching the front camera to the window mount
Before the device can be used in a car, it is essential to first install a properly
attached window mount. Make sure that you place the recorder in a safe,
appropriate location where it will not obstruct the driver’s view.
Clean windshield before apply mount, do not attach camera for at least 20
minutes.
2. Inserting a memory card
You will need to insert a memory card before you can begin recording. The
recorder supports MicroSD cards with a capacity of up to 256GB. For reliable
operation, use a Class 10 memory card with a capacity of at least 8GB.
To Next Page
Loading...
