Operating your V2 Dashboard Camera
System Settings
31
© 2019
REXING All Rights
Reserved.
SYSTEM SETTINGS
On Video Recording Mode, Press REC to stop recording then press MENU
button twice open System Settings Menu.
Date/ Time Setup
Use this setting to change the device’s time and date:
UP/Down – Change value
OK – Move to next segment
MENU – Save Settings
Note: If the battery remains fully discharged or is removed from the
device, the time and date will be reset.
Auto Power Off
Recommend setting: Off
When enabled, this option allows the device to shut down automatically if
Recording Mode is not engaged.
Beep Sound
Recommend setting: On
This setting allows you to turn the device's button sound effect on or off.
Language
Use the following procedure to change the device’s time and date. Language
availability may vary depending on the region.
To Next Page
Loading...
