Rexing V2 - Powering the Device On and Off

Getting Started
Quick Start
25
© 2019 REXING All Rights Reserved.
Turning the Device On and Off
Press and hold the ON/OFF button for a few seconds to turn on the device.
A welcome message will be displayed onscreen as shown in the image below.
To turn off the device, again press and hold the ON/OFF button for a few
seconds. A goodbye message will be displayed onscreen as shown in the
image below.
Note: The V2 Dashboard Camera will switch on and off automatically if you
keep it permanently connected to the car charger. V2 will automatically start
recording when power on.
***If your car cigarette lighter provides constant power to the Dash Cam, the
unit will not turn on and off with the vehicle***