Rexing V2 - Power and Card Handling Issues

Operating your V2 Dashboard Camera
Troubleshooting
41
© 2019 REXING All Rights Reserved.
Not holding charge
Battery may be
depleted
Power cord may be
defective
Charge the battery for 3
hours. Make sure unit is off
while charging. Turn on the
unit, unplug it. If it turns off
immediately, contact
customer service for
assistance with a
replacement.
Unit keep rebooting
Battery may be
depleted
Charge the battery for 3
hours. Make sure unit is off
while charging.
SD Card Won’t Stay
In
SD card may not be
compatible
SD card may be too
thin
Use your nail or a coin to
push the SD Card in until it
clicks
Use a different SD Card
SD Card Not
Recognized (Custer
error)
SD Card needs to be
formatted.
Format SD Card
Use a different SD Card