Rexing V55 - Basic Operation; Device Power Management; Menu Navigation and Settings

Reset
10
4. Basic Operation
Device Power
The device is automatically powered on when plugged into a 12V accessory
socket or cigarette lighter and received a charge (i.e. the vehicle is started).
To turn the device on manually, press and hold the Power button until the welcome
screen appears.
The camera will automatically start recording when power on.
Press and hold the Power button
to turn the device on manually
Menu Settings
Power the camera on. If the camera is recording, press the OK button to stop
recording.
Hold the MENU button and toggle to the desired mode. Pr
ess the MENU button
once to enter the settings menu for a Mode. Press the MENU button twice to enter
the System Settings (Set up).