Rexing V5C - Basic Operation: Power and Menu Navigation; Device Power Control; Accessing System Menus

Reset
11
Press and hold the Power button
to turn the device on manually
Device Power
The device is automatically powered on when plugged into a 12V accessory socket
or cigarette lighter and received a charge (i.e.: the vehicle is started).
To turn the device on manually, press and hold the Power button until the welcome
screen appears.
The camera will automatically start recording when power on.
5. Basic Operation
Menu Settings
Power the camera On. If the camera is recording, press the OK button to stop
recording.
Hold the MENU button and toggle to the desired mode. Press the MENU button
once to enter the settings menu for a Mode. Press the MENU button twice to enter
the System Settings (Set up).