REXON RM-03N - Factory Default Reset

PAGE 20
microphone till LCD displays “DISPLAY TYPE”
3. Rotate power knob to choose either FREQ/CHANNEL/NAME.
 Default: FREQ
 Once you choose Channel mode, the radio will not be able to
switch between channel & VFO modes by pressing
button.
• Factory Default
If your radio seems to be malfunctioning, resetting the microproces-
sor may solve the problem. When performing the reset, you may lose
memory data and stored information. Back up or write down impor-
tant data before performing the reset.
1. Hold button for 2 seconds to enter menu items.
2. Press button repeatedly or press Up/Down key on extended
microphone until LCD shows “RESTORE”
3. Turn selector knob to choose OFF/SETUP?/FACTORY.
4. FACTORY: resume factory default; SETUP: return initial setup;
OFF:Non application
5. Press button to conrm and exit.