Need help?Do you have a question about the REXON RHP-530E and is the answer not in the manual?
Procedure for powering the transceiver on and off.
Methods for selecting frequencies in Airband, Nav, and Com bands.
Procedure to access the emergency frequency 121.5 MHz.
Indicator behavior when receiving a signal.
How to transmit, including PTT button usage and LED indication.
Adjusting the squelch level to filter unwanted signals or noise.
Adjusting the sensitivity for Voice Operated Transmit (VOX) function.
Enabling and using the intercom feature for two users.
Saving current frequency and parameters to a memory channel instantly.
Retrieving stored memory channels by number.
How to select and activate scanning modes.
Operating in Doppler VOR mode for navigation.
Operating in Course Deviation Indicator (CDI) mode for navigation.
Navigating towards a VOR station using CDI mode.
Navigating away from a VOR station using CDI mode.
Pairing and using a Bluetooth headset with the transceiver.
Steps to turn the Bluetooth function on and off.
Transmitter-related specifications like RF output power and modulation.
Receiver-related specifications including sensitivity and bandwidth.
General| Power Output | 5W |
|---|---|
| Channel Capacity | 16 |
| Battery | 7.2V 1200mAh Ni-Cd |
| Dimensions | 58 x 125 x 35 mm |
| Weight | 320 g |
| Number of Channels | 16 |
| RF Output Power | 5W |
To Next Page
