•Weather Channel Alert On/Off
(1) Press Ifl button continuously until LCD shows fli T~OF
or
P^ss^Hi
button for 2 seconds until H is flashing
then press 0
D
H button.
Press
C^)/(W}
button or the dial selector to select On/
Off.
Press Qsp button to save and quit the menu list.
(2)
(3)
|Power Saving
(1) Press jfl button continuously until LCD shows
^I'-uFF or pressed button for 2 seconds until Q is
(2)
(3)
flashing then press
v7 *c 1
button.
Press (3&/(S) button or the dial selector to select On/
Off.
Press QJP button to save and quit the menu list.
^NOTE:
Power saving scale is programable from 1:1; 1:2,
1:3 or Off, Default is Off
•
Nav
Band Frequency Step
Setting
(1) Press It] button continuously until LCD shows HI' "<?5.£J
or
press^^ button for 2 seconds until Q is flashing
then press
I *
T0
1
button.
(2) Press (3)/(3) button or the dial selector to select from
5K,8.33K
I
10K
1
20K
I
25K,50K and 100K.
(3) Press Q?P button to save and quit the menu list.
•Com Band Frequency Step
Setting
(1) Press •!] button continuously until LCD shows
C"B<'c?5
or press MM button for 2 seconds until Q is flashing
then press [
3fR0M
)button.
(2) Press (3^/(2) button or the dial selector to select from
5K,8.33K
I
10K,20K,25K
I
50K
I
100K and 8.33K/25K
(3) Press QS2 button to save and quit the menu list.
A The step setting is relative to VFO CHANNEL ID LIST
(page 21), DO NOT change is recommended.
•Keypad Lock/Unlock
Press €D button, LCD shows Q then press the CUP button
to lock/unlock the keypad
•ANL On/Off
Automatic Noise Limiter: when activated the ANL feature will
filter out unwanted aircraft ignition and static noise.
(1) Press CI button, LCD shows H then press the
(6AS)
button to enable ANL feature, I Aim appears on LCD while
ANL is activated.
(2) To disable ANL feature .press •• button then press the
16ANL) button.
To Next Page
Loading...
