Rextron KNV104 User Manual

!
!
")!
options for Audio Stick:
ON
and
Off
. When set to '
On
',
audio selection f ollows computer selection. When set to
'
Off
', audio selection stops following computer selection.
It is usef ul if you want to listen to a particular computer's
audio signal while operating other computers. The
non-volatile memory stores the Audio Stick setting.
!"
Scan Type
Ready PC +
#
##
#
: In Scan mode, scan through power-on
and eye mark selected computers.
Ready PC
: In Scan mode, scan through power-on
computers.
#
##
#
Only
: In Scan mode, scan through any
#
selected
computer regardless of computer power status. This
option is not av ailable f or 4-port KVM switches.
The non-v olatile memory stores the Scan Type setting.
!"
Scan Rate
Sets the duration of a computer displayed in Auto Scan
mode. The options are
3 seconds, 8 seconds, 15
seconds and 30 seconds
. The non-volatile memory
stores the Scan Rate setting.
!"
Keyboard Speed
Integra offers key board ty pematic setting that ov errides
the similar settings in BIOS and in Windows. Av ailable
speed options are
Low
,
Middle
,
Fast
and
Faster
as 10,
15, 20 and 30 characters/sec respectively. The
non-volatile memory stores the Keyboard Speed setting.
!"
Hotkey Menu
When y ou hit the left <CTRL> key twice within two
seconds, the "Hotkey Menu" appears displaying a list of
hot-key commands if the option is
On
. The 'Hotkey Menu'
can be turned
Off
if you prefer not to see it when the left
<CTRL> key is hit twice. The non-v olatile memory stores
the Hotkey Menu setting.
!
!
"*!
!"
CH Display
Auto Off: After you select a computer, the port number
and name of the computer will appear on the screen for 3
seconds then disappear automatically. Always On: The
port number and name of a selected computer and/or
OSD status displayed on the screen all the time. The
non-volatile memory stores the CH Display setting.
!"
Position
The position of the selected computer name and/or OSD
status displayed on screen during operation. The actual
display position shifts due to different VGA resolution, the
higher the resolution the higher the display position.
The non-v olatile memory stores the Position setting.
Upper Left
(
UL
),
Upper Right
(
UR
),
Lower Left
(
LL
),
Lower Right
(
LR
).
Middle
(
MI
).
$
ESC: To exit the OSD, press the <ESCAPE> key.

Rextron KNV104 Specifications

General

Brand	Rextron
Model	KNV104
Category	Switch
Language	English