Step seven: Installing and adjusting the armrests onto the seat (cont.)
Ensure that both armrests are adjusted to the same desired width
position. Otherwise, there may be risk of injury, instability, and
product damage.
If there is movement, even after fully tightening the adjustment knob,
DO NOT proceed with assembly and contact customer support.
Repeat steps 2 - 4 for the right-side armrest.5)
Ensure both armrests are securely in place by pulling on both adjustment bars.
There should be no movement.
6)
Locate the basket bracket, which is pre-installed on the front of the tiller.1)
Step eight: Installing the front basket
If there is any damage observed on the front basket or basket
bracket, DO NOT proceed to assemble, as it may lead to basket
failure or damage.
While using one hand to maintain the armrest’s position, use the other to insert the
armrest adjustment knob into the bracket and turn clockwise until it is fully tightened.
4)
Assembly (Cont.)
19
To Next Page
Loading...