REYHEE CRUISER - Using Dual Throttle Levers

How to use the dual throttle control levers
Locate the dual throttle control levers.
BEFORE using the dual throttle control levers:
Moving the Cruiser forward
Moving the Cruiser to the left
Moving the Cruiser to the right
1)
2)
3)
4)
5)
Moving the Cruiser in reverse
Stopping / braking
6)
7)
Releasing the dual throttle control levers will automatically engage the brake.a)
Ensure the power is ON, and that the rear lever is in Drive mode.
Ensure the user is properly seated, and has a steady and rm grip on the handlebars.
a)
b)
Check the speed adjustment knob and ensure it’s at the desired speed level.c)
Use your right hand to gradually pull the RIGHT-SIDE throttle control lever until the
Cruiser moves forward.
You must continuously pull the right-side throttle control lever to continue moving the
Cruiser forward.
a)
b)
Use your right hand to gradually pull the RIGHT-SIDE throttle control lever until the
Cruiser moves forward.
Simultaneously turn the tiller to the left, using the handlebars.
a)
b)
Note that the Cruiser has a turning radius, so movement to the left will NOT be a
sudden 90 degree turn.
c)
Use your right hand to gradually pull the RIGHT-SIDE throttle control lever until the
Cruiser moves forward.
Simultaneously turn the tiller to the right, using the handlebars.
a)
b)
Note that the Cruiser has a turning radius, so movement to the right will NOT be a
sudden 90 degree turn.
c)
Use your left hand to gradually pull the LEFT-SIDE throttle control lever until the Cruiser
moves in reverse.
You must continuously pull the left-side throttle control lever to continue moving the
Cruiser in reverse.
a)
b)
Alternatively, the forward function can be engaged by pushing the left-side throttle
control lever.
c)
Alternatively, the reverse function can be engaged by pushing the right-side throttle
control lever.
c)
How to Operate Your Cruiser (Cont.)
37