REYHEE CRUISER - How to Transport the Cruiser

WARNINGS
DO NOT attempt to push, lift, or pull the product by any of its plastic parts, as this may
cause injury and product damage.
If transporting the product in a moving motor vehicle, in order to prevent potentially unsafe
shifting/movement of the product while the vehicle is in motion:
Ensure the product is powered OFF.
Ensure the rear lever on the product is in Drive mode (NOT Neutral/freewheel
mode).
•
•
Transporting the product MUST be done by an adult, who is able to demonstrate the
physical and mental faculties required to understand the instructions.
At NO time while transporting the product should any person/child/pet/item(s) be seated
or placed in it.
•
•
Ensure the intended moving motor vehicle is rated/certied to be able to transport
an electric motorized scooter, has measures to secure such a product, and can bear
the full weight of the product.
DO NOT place the product in either the driver’s seat or any passenger seat.
DO NOT strap or hitch the product to the exterior (e.g. roof, door, undercarriage)
of any vehicle.
Ensure the product is properly disassembled and properly secured INSIDE the back
of the moving vehicle.
Ensure NO PART of the product is exposed (e.g. hanging out of a window or open
trunk).
This product is NOT approved to be used with any tie-down system, which is
generally used to transport a seated user in an electric-powered wheelchair (or other
types of motorized rideable products) in a motor vehicle.
This product is NOT approved to be used with any tie-down system, which is
generally used to transport a seated user in an electric-powered wheelchair (or other
types of motorized rideable products) in a motor vehicle.
How to Transport your Cruiser
43