Locked Panel!
Press Menu key For 3 seconds to Unlock!
Transition
Version
Ethernet
T-Bar Correction
Fader Correction
Key Board Test
Lock Front Panel
1. Push the [MENU] button, and enter to the menu items, turn the rotary knob and select
,
enter to the Lock Front Panel, if select “on”, then LCD screen shown follows:
2. Push <Menu>over 3 seconds then unlock the panel.
Language/
语言
1.
Push the [MENU] button, and enter to the menu items, turn the rotary knob and select
, enter to the
language/语言 selection interface.
2. Select ”ENGLISH”或”中文” as needed
System Setting
1. Push the [MENU] button, and enter to the menu items, turn the rotary knob and select
, enter to the
system setting interface.
2. Setting parameter as needed:
Transition: Trans Mode can be selected by “Stay” or “Swap”. Trans Times setting range between 0-10S.
Version: Shown Device version information for main control board.
Ethernet: Shown Ethernet Information.
T-Bar Correction: Shown T-Bar correction steps.
To Next Page
Loading...
Need help?
General
