Fader Correction: Shown Fader Correction steps.
Key Board Test:
LED Light Test select “On”, LED light for each key on front panel will be lit one by one, and KEY Value
shown “MENU”.
LED Light Test select “Off”, LED light for all keys will be off, and KEY Value shown “MENU”.
Factory Reset
1. Push the [MENU] button, and enter to the menu items, turn the rotary knob and select , enter to the
factory reset interface.
2. Select “Factory Reset” or “Factory Reset, Save IP” as needed, then will clean up the before setting, return to
default setting.
To Next Page
Loading...
Need help?
General
