To Next PageTo Next Page
Need help?Do you have a question about the Rheem 13PJL18A01 and is the answer not in the manual?
General| Model Number | 13PJL18A01 |
|---|---|
| Category | Heat Pump |
| Cooling Capacity (BTU) | 18000 |
| Heating Capacity (BTU) | 18000 |
| Refrigerant | R-410A |
| Voltage | 208/230 |
| Phase | 1 |
| Compressor Type | Scroll |
Covers critical warnings for installation, operation, and electrical safety, including shock hazards and proper grounding.
Details tubing installation, insulation, brazing, and leak testing procedures for refrigerant lines.
Procedures for checking system airflow requirements and verifying refrigerant charge against specifications.
Method for charging systems in cooling and heating modes using liquid pressure readings.
Procedures for charging by weight and performing final leak detection after installation.
Instructions for proper power wiring, grounding, and compliance with electrical codes for safety.
Explains low voltage control wiring, thermostat requirements, and reference to wiring diagrams.
A logical flow chart for diagnosing electrical issues in the heat pump system.
Flow chart for diagnosing mechanical problems during cooling operation.
Flow chart for diagnosing mechanical problems during heating operation.
Flow chart for diagnosing issues related to the defrost system.
Troubleshooting high superheat, moisture freezing, and TEV malfunctions.
Provides the main wiring diagram, component codes, wiring information, and color codes.
