Rheem 13PJL36A01 User Manual

92-20522-57-03
SUPERSEDES 92-20522-57-02
INSTALLATION INSTRUCTIONS
WARNING
▲WARNING
!
These instructions are intended as an aid to qualified licensed
service personnel for proper installation, adjustment and
operation of this unit. Read these instructions thoroughly
before attempting installation or operation. Failure to follow
these instructions may result in improper installation, adjust-
ment, service or maintenance possibly resulting in fire, electri-
cal shock, property damage, personal injury or death.
NOTE: Appearance of unit may vary.
13 & 14 SEER SERIES
CUBE HEAT PUMPS
1
1
⁄2 - 5 TONS FEATURING
EARTH-FRIENDLY R-410A REFRIGERANT R-410
refrigerant
earth friendly refrigerant

Rheem 13PJL36A01 Specifications

General

Brand	Rheem
Model	13PJL36A01
Category	Heat Pump
Language	English

Summary

Safety Information

Unit Location

Heat Pump Location Guidelines

Unit Mounting

Tie-Down Method

Refrigerant Connections

Interconnecting Tubing

Vapor and Liquid Lines

Tubing Installation Procedures

Tubing Connections

Step-by-step instructions for brazing and connecting refrigerant lines to units.

Leak Testing

Procedures for pressurizing and leak testing the refrigerant system.

Demand Defrost Control

Defrost Initiation Conditions

Details the three conditions required to initiate a defrost cycle.

Defrost Termination

Describes how the defrost cycle terminates, based on time or temperature.

Temperature Sensors

Demand Defrost Operation

Troubleshooting Demand Defrost

Evacuation Procedure

Start Up and Performance

Checking Airflow

Checking Refrigerant Charge

Charging by Liquid Pressure

Method for charging the system using liquid pressure readings in cooling/heating modes.

Charging by Weight

Method for charging the system by accurately measuring refrigerant weight.

Final Leak Testing

Final checks for leaks in the refrigerant system after charging.

Electrical Wiring

Power Wiring

Instructions for connecting the main power supply wiring to the unit.

Grounding

Essential safety requirement for permanent grounding of the unit.

Control Wiring

Trouble Shooting

Electrical Checks Flow Chart

A flowchart for diagnosing electrical issues affecting unit operation.

Cooling Mechanical Checks Flow Chart

A flowchart for diagnosing mechanical problems during cooling operation.

Heating Mechanical Checks Flow Chart

A flowchart for diagnosing mechanical problems during heating operation.

Defrost Mechanical Checks Flow Chart

Subcooling Calculation

General Troubleshooting Chart

Service Analyzer Chart

Wiring Diagram