RHINO SHELF
®
UNIVERSAL KIT
Installation Guide
Your Rhino Shelf
®
Universal Shelf Kit can be installed in four different configurations:
Each Universal Shelf Kit contains a Left-End Assembly and a Right-End Assembly. An 8-foot kit also
contains one Tee Assembly. A 12-foot kit contains two Tee Assemblies, a 16-foot kit, three Tee
Assemblies, etc. Four-foot kits do not require a Tee Assembly.
A Mid-Wall installation uses all of these assemblies. For a Left- or Right-Wall Start, modify the
appropriate End Assembly as shown below. For a Wall-to-Wall installation, modify both End
Assemblies:
Left-End Assembly Right-End AssemblyTee Assembly
(Number of Tee's
depends on length
of kit you ordered.)
Remove nut & bolt from Left End Assembly
to get Left Wall Start
Remove nut & bolt from Right End
Assembly to get Right Wall Start
Page
1
Detailed instructions
Begin on Page 6
Detailed instructions
Begin on Page 4
Detailed instructions
Begin on Page 8
Detailed instructions
Begin on Page 10
Contents of Kit: In addition to the Assemblies shown above, each Universal Shelf Kit contains
sufficient fasteners for the length of shelves you ordered, a Spacer Guide, one Left and one Right
Wall Bracket, and a Tee Wall Bracket for each Tee Assembly in your kit.
(All Parts and Assemblies have Labels)
Left
Wall Bracket
Right
Wall Bracket
Tee
Wall Bracket
3” Lag Bolts
#8 Screws5/16” Nuts and Bolts
Spacer Guide
Left Wall Start Right Wall Start
These Universal Instructions work for both
Full-Size Rhino Shelves and for Rhino Mini
Shelves.
MINI Special Instruction
For Rhino Mini Pg 3
Look for the Mini Rhino
symbol for
Special
Instructions.
To Next Page
Need help?
General