OPERATION
EC72 03/08 Operation Section 4-16
© 2008 Alamo Group Inc.
OPERATION
• Perform scheduled lubrication as detailed in
the maintenance section.
• Ensure all decals are in place and legible.
• Ensure the driveline is securely attached to
tractor. Make sure the driveline yoke locking
collar is securely seated in the grooves of the
PTO shaft by pushing and pulling the yoke
several times.
• Lift Type-Inspect that the 3-point hitch pins are
the proper size, correctly installed, and secured
to the tractor lift arms with retaining pins
inserted.
• Pull Type-Inspect that the hitch pin is the
correct size. OPS-R-0008_E
• Ensure deflectors are in position and not
damaged. Replace worn, broken, and missing
pieces. OPS-R-0068_A
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition. All safety devices should be
inspected carefully at least daily for missing or broken components. Missing, broken,
or worn items must be replaced at once to reduce the possibility of injury or death
from thrown objects, entanglement, or blade contact.
(SGM-3)
To Next Page
Loading...
Need help?
General
