OPERATION
EC72 03/08 Operation Section 4-35
© 2008 Alamo Group Inc.
OPERATION
o disconnect the mower, first extend the tractor 3-
oint hitch top link to remove tension on the top link
itch pin. When the pin is loose and easy to rotate,
emove the pin from the mower. Next remove both
ower hitch pins.
fter disconnecting the 3 lift points, remove the
ower driveline from the tractor PTO shaft. Lay the
riveline down carefully on support flat to avoid
amaging the driveline or its shield. Do not let the
riveline fall into mud or dirt, which can contaminate
he bearing and shorten the life of the driveline.
OPS-R-0031_B