INTRODUCTION
EC72 03/08 Introduction Section 2-3
© 2008 Alamo Group Inc.
INTRODUCTION
Your RHINO EC72 mower is designed for light-duty cutting such as pasture mowing, weed and grass control,
and cutting brush up to 1" in diameter. With a reasonable amount of preventive maintenance, your Mower will
provide years of dependable service.
For Non-Agricultural use, OSHA, ASAE, SAE, and ANSI standards require the use of Chain
Guards, Deflectors, or Solid Skirts at all times. The Mower manufacturer strongly
recommends the use of Chain Guards or Rubber Deflectors for Agricultural purposes as
well, to reduce the risk of property damage, serious bodily injury, or even death from objects
thrown out by or from contact with the Cutting Blades.
At least 20% or the tractor’s weight must be on the front tires with the Mower lifted to provide
adequate traction for safe steering under good conditions. Slow down on hills, rough terrain,
and curves.
The front, rear, left, and right are determined by the normal direction of travel, the same as driving an
automobile.
To Next Page
Loading...
Need help?
General
