What to do if my RHOSS DIVA is not heating or cooling as before?
If your RHOSS Air Conditioner isn't heating or cooling effectively, first ensure the filter is sufficiently clean. Also, check the hydraulic circuit for air by bleeding the battery.
What to do if my RHOSS DIVA Air Conditioner is leaking water?
If your RHOSS Air Conditioner is leaking water, check that the unit is inclined towards the condensation drain. Also, verify that the condensation drain is not blocked.
Why RHOSS DIVA Air Conditioner motor does not turn on or runs incorrectly?
If the motor of your RHOSS Air Conditioner isn't running correctly, ensure that the power supply is connected. Check the wiring connections against the electrical diagrams. Also, verify the positions of the main switch, seasonal switch, and thermostat.
General| Brand | RHOSS |
|---|---|
| Model | DIVA Series |
| Category | Air Conditioner |
| Language | English |
Emphasizes the importance of reading the manual for user safety and preventing unit damage.
Lists critical areas of work: handling, storage, installation, maintenance, operation, and electrical/refrigeration work.
Mandates that all repairs and maintenance must be done by qualified specialists.
Critical safety information.
Covers essential checks and requirements before installation, including safety switch, earthing, and environmental conditions.
Details essential safety precautions and procedures for maintenance and repairs, including power disconnection and valve closure.
Details key specs: max/min fluid temps, max working pressure for fan coil/heat exchanger.
Covers all necessary preparations, location requirements, and pre-installation steps before unit mounting.
Details the steps for physically mounting the unit, including hole marking, rod fixing, and length determination.
Mandates thermal insulation for all air ducts to prevent condensation and water dripping.
Emphasizes correct installation including insulation of air and fluid pipes to prevent condensation.
Specifies the operating temperature range for the heating/cooling fluid.
Warns to shut off water supply during summer/long periods of fan inactivity to prevent external condensation.
Advises insulating pipes and valves when cooling to prevent condensate drips.
Covers critical safety and compliance aspects of electrical installation, including voltage checks, earthing, power capacity, and disconnecting power.
Mandates adherence to the wiring diagrams in the booklet for all connections.
Core technical information.
Explains the electronic board's role in connecting resistance/thermostat, safety thermostat operation, and reset procedures.
Covers checking fan operation, keeping air passages clear, and probe compatibility before unit activation.
Explains safety thermostat types, operation, reset procedures, and the importance of identifying causes for tripping.
Explains the symbols and codes used in the electrical wiring diagrams.
Covers critical warnings for valve installation, including wiring, water blockage, overflow risk, timing, seals, and liability.
Emphasizes using trained personnel and disconnecting power before any cleaning or maintenance tasks.
Addresses issues where the motor fails to start or operates improperly.
Covers issues where the unit's heating or cooling performance is inadequate.
Addresses problems related to water leakage from the appliance.
Troubleshooting for fan not starting, insufficient airflow, or noisy operation.
Addresses problems related to inadequate heating or cooling performance from the fan coil unit.
Covers troubleshooting for water leaks in cooling mode and fluctuating room temperatures.
To Next Page
