When the Waiting to Connect screen is not displayed, press the Switching Input/Back button to
switch the input method to "Wireless Connection". For details, see "Switching Inputs", Operating
Instructions.
2. Start RICOH Monitor Mirroring for iOS.
When RICOH Monitor Mirroring for iOS starts, the search for RICOH Monitors in the same
network starts, and a list of such is displayed.
When using RICOH Monitor Mirroring for iOS for the first time, the following message appears:
• Whether or not to allow device search on the local network
Confirm the displayed message, and then tap [OK].
• Whether or not to allow the use of wireless data
Confirm the displayed message, and then tap [WLAN only].
3. Tap the device name of the machine that you want to connect.
1. Connecting the Device via Wireless Connection
32
To Next Page
Loading...