Windows 2000/Windows XP
15
1
[Advanced] dialog box
This dialog box is displayed when you click [Advanced] on the [Paper/Quality] tab
or the [Layout] tab. Here you can set detailed items about the paper size and the
functions of the machine.
❖
❖❖
❖ [Paper/Output]
❖
❖❖
❖ “Paper Size”
Select the size of the paper to be printed.
Note
❒ It is possible to set the size of custom paper when selecting “PostScript
Custom Page Size”. See p.17 “Printing on custom sized paper”.
❖
❖❖
❖ “Collated”
If you select more than “2” in “Copy Count” , “Collated” will become en-
abled. Make sure to regularly clear the “Collated” check box, because if
“Collated” is not cleared, master making may be done everytime a page is
going to be printed.
❖
❖❖
❖ [Graphic]
❖
❖❖
❖ “TrueType Font”
TrueType Font can replace printer fonts by following the “Font Substitu-
tion Table” when “Substitute with Device Font” is selected.
❖
❖❖
❖ [Printer Features]
❖
❖❖
❖ Adjust Image Brightness
The brightness of the whole printed image can be adjusted to one of seven
levels.
Note
❒ The brightness of the color of characters does not change.
❖
❖❖
❖ “Printer-Side Operation”
Settings can be made using the printer driver on the computer and the ma-
chine's display panel. When “Printer-Side Operation” is set to “On”, the
following items can be set on the display panel.
• Sort
• Clear Modes
• Speed Select
• Auto-Print after Master Making
• Job Separator
• Skip Feed
• Eco. Mode
• Number of print sets
To Next Page
Loading...
