PostScript 3 - Setting Up for Printing
14
1
❖
❖❖
❖ [Output Protocol]
Select the data communication protocol. When connected to a parallel inter-
face, select “ASCII”. An error may occur if other protocols are used.
❖
❖❖
❖ [Installable Options]
Set connected option devices. The following items are installable:
• Sorter
• Memory Unit
Print Setting Details
The necessary print settings, such as paper size or print orientation, can be set
when printing from applications.
The print settings in the applications become the initial settings of the applica-
tion.
[Layout] tab
Set the print orientation and the order in which the pages are printed.
❖
❖❖
❖ [Orientation]
Specify the print orientation. When changing the specified orientation and se-
lecting “Rotated Landscape”, the paper will be rotated 90 degrees counter-
clockwise and printed.
❖
❖❖
❖ [Page Order]
Specify the order in which the pages are printed. When “Front to Back” is
specified, the first page will be printed as the top page. When “Back to Front”
is specified, the first page will be printed as the last page.
❖
❖❖
❖ [Pages Per Sheet]
Specify the number of pages printed on one sheet of paper. For example, if
“1” is specified, one page will be printed on one sheet. If “2” is specified, two
pages will be printed on one sheet.
[Paper/Quality] tab
Set the Paper Feed Tray to be used and the color.
❖
❖❖
❖ [Tray Selection]
Specifies a paper feed tray to be used for printing.
Note
❒ Select “Paper Feed Tray” here.
❖
❖❖
❖ [Color]
Normally, selecting “Color” is recommended.
To Next Page
Loading...
