Appendix
72
7
Specifications
This section contains the electrical and hardware specifications for the machine
including information about the options.
*
1
The PCL 5e printer driver cannot be used in the machine that has a resolution
of 400 dpi.
*
2
To use NetBEUI, use the SmartNetMonitor for Client port.
Component Specification
Resolution 400 dpi, 600 dpi
Parallel Interface Standard 36-pin printer cable and a parallel port on the host com-
puter.
IEEE1284
Note
❒ Do not use a parallel cable that is longer than 3 meters (10 feet).
LAN interface 100BASE-TX, 10BASE-T
Printer Language PostScript 3
PCL 5e*
1
Frame type EthernetII, IEEE802.2, IEEE802.3, SNAP
Protocol • TCP/IP
Windows 95
Windows 98
Windows Me
Windows 2000
Windows XP
Windows NT 4.0
• IPX/SPX
NetWare 3.12, 3.2, 4.1, 4.11, 4.2, 5, 5.1 IntranetWare
• NetBEUI*
2
Windows 95
Windows 98
Windows Me
Windows 2000
Windows NT 4.0
• IPP
Windows 95
Windows 98
Windows Me
Windows 2000
Windows XP
Windows NT 4.0
• AppleTalk
Mac OS 7.6.1 or later
Mac OS X version 10.1 or later
SNMP MIB-II, PrinterMIB, HostResourceMIB, RicohPrivateMIB
To Next Page
Loading...
