Macintosh
35
1
❖
❖❖
❖ [Adjust Image Brightness]
Seven phases can coordinate brightness of the whole printed image.
Note
❒ Brightness of color of character is not changed.
❖
❖❖
❖ [Printer-Side Operation]
It is possible to perform a few things using both the machine's display panel
and the printer driver installed in your Macintosh. When [Printer-Side Opera-
tion] is set to “On”, the following items are enabled on the display panel.
• Sort
• Clear Modes
• Speed Select
• Auto-Print after Master Making
• Job Separator
• Skip Feed
• Eco. Mode
• Number of print sets
Note
❒ “Auto-Print after Master Making” is displayed on the machine's display
panel as “Auto Cycle”.
❖
❖❖
❖ [Clear Modes]
When set to “On”, the machine settings return to their defaults before Master
Making.
❖
❖❖
❖ [Auto-Print after Master Making]
When set to “On”, printing starts automatically immediately after Master
Making.
❖
❖❖
❖ [Eco. Mode]
When set to “On”, the amount of ink consumption is reduced.
❖
❖❖
❖ [Speed Select]
You can select the printing speed.
❖
❖❖
❖ [Skip Feed]
• Use to make the interval between paper feeds longer, allowing the ink to
dry.
• Use to print paper longer than the standard size.
Limitation
❒ The maximum length of paper that can be printed using Skip Feed is
460mm. However, when printing on paper longer than 432mm, the deliv-
ered paper may fall off the paper delivery end plate. Therefore, you should
hold the paper so that it does not fall off.
To Next Page
Loading...
