Ricoh Aficio 1022 - Page 13

x
2.4.2 DOUBLE-SIDED ORIGINALS ................................................. B386-12
2.4.3 ORIGINAL TRAILING EDGE SENSOR................................... B386-13
2.5 STAMP............................................................................................. B386-14
2.6 TIMING CHART................................................................................ B386-15
2.7 CONDITION OF JAM DETECTION.................................................. B386-16
2.8 OVERALL ELECTRICAL CIRCUIT .................................................. B386-17
3 SERVICE TABLES...............................................................B386-18
3.1 DIP SWITCHES................................................................................ B386-18
4 REPLACEMENT AND ADJUSTMENT.................................B386-19
4.1 DF EXIT TABLE AND COVER......................................................... B386-19
4.2 ORIGINAL FEED UNIT .................................................................... B386-20
4.3 LEFT COVER................................................................................... B386-21
4.4 PICK-UP ROLLER............................................................................ B386-22
4.5 FEED BELT...................................................................................... B386-23
4.6 SEPARATION ROLLER................................................................... B386-24
4.7 ORIGINAL SET/ORIGINAL REVERSE SENSOR ............................ B386-25
4.8 ORIGINAL SIZE SENSOR ............................................................... B386-26
4.9 ORIGINAL FEED DRIVE.................................................................. B386-27
DF Feed Clutch............................................................................ B386-27
Pick-up Solenoid.......................................................................... B386-27
Transport Motor ........................................................................... B386-27
DF Feed Motor............................................................................. B386-27
4.10 REGISTRATION SENSOR............................................................. B386-28
4.11 STAMP SOLENOID AND ORIGINAL EXIT SENSOR.................... B386-29
INTERCHANGE UNIT (B300/B416)
1 OVERALL MACHINE INFORMATION...................................B416-1
1.1 SPECIFICATIONS.............................................................................. B416-1
1.2 MECHANICAL COMPONENT LAYOUT ............................................ B416-2
1.3 DRIVE LAYOUT ................................................................................. B416-3
2 DETAILED DESCRIPTION ....................................................B416-4
2.1 JUNCTION GATE MECHANISM........................................................ B416-4
To the Exit Tray or Bridge Unit
(for the Upper Tray on top of the Bridge Unit, or the Finisher)....... B416-4
To the 1-bin Tray............................................................................ B416-4
To the Duplex Unit......................................................................... B416-4
3 REPLACEMENT AND ADJUSTMENT...................................B416-5
3.1 EXIT SENSOR REPLACEMENT........................................................ B416-5